4X4 off road recover 20″ 33″ 48″ 60″ hi lift Farm Jack
This universal 3 -Ton 4×4 Recovery and Farm Jack is very versatile. It’s a perfect choice for any application that deals with lifting, pulling, clamping or spreading.
Use it anywhere your tractor, 4-wheel drive, or any vehicle may end up.
Constructed of high-grade steel and built to exacting standards for quality and durability Lead-free paint finish is applied to ensure a long-lasting finish and to help prevent rust Paint is oil, grease and dirt-resistant for easy clean-up. Adjustable top-clamp clevis can clamp at any position on the upright steel standard Lifting handle has a rubberized grip for comfort and better grip. Rugged lifting nose runner is ribbed for strength Secure reversing latch allows for lifting or lowering operations
Wide base prevents the jack from sinking into soft surfaces, or add the optional Foot Base for added ground stability and reduce sinking.
Important Safety Precaution
1.Do not use extensions on the handle
2.Always keep a firm hold on the handle
3.Be sure base of jack is on firm & level ground
4.Be sure jack will not slip after load is applied
5.Be sure lifting arm is fully under load is applied
6.Be sure the load is stabilized before lifting so that it will not not shift when lifting or lowering
7.Do not work under vehicle after lifting unless you have jackstands supporting the vehicle
8.Do not push load off the jack, lower it carefully
|Model||Description||Min. Height||Max. Height|
|EJFJ001||20” with handle keeper||130mm||680mm|
|EJFJ-002||33” with handle keeper||130mm||700mm|
|EJFJ-003||48’’ with handle keeper||130mm||1070mm|
|EJFJ-004||60’’ with handle keeper||155mm||1350mm|